Veksler Engineering

Tubular Level Gauge


Tubular Level Gauge

We are instrumental in manufacturing Tubular Level Gauge that is appreciated for its simple construction, long working life and reliable performance among the clients. The Tubular Level Gauge is specially designed to measure visual liquid level. Moreover, we ensure the quality of Tubular Level Gauge and make sure it is manufactured in compliance with international standards.

Salient Features :
  • Choice of Tie Rod or C-Frame Construction
  • Available with or without isolating valve
  • Material integrity assured through strict compliance of chemical composition analysis in a Standard Laboratory
  • H Grade Borosilicate glass tube 16/19/25 mm outer dia with Teflon Packing
  • Glass tube an be removed online i.e. without disconnection from vessel
  • Standard Connection : 1/2" / 3/4" / 1" Flange drilled to ASA 150#, others on request
  • Alluminium/SS scale with 5 mm resolution as standard and 1 mm on request
  • Drain Plug 1/2" Vent Plug 3/4" as std and drain/vent valve as optional
  • Safety Ball check device(optional)
  • Defrost/illuminator available on request.
  • Hydro test pressure : 12 KG/cm2, 100 Deg C max working temperature.
  • Tie Rod Construction is ‘light' and permits 360oC visibility
  • C-Frame construction is robust and permits observation from Front & Rear
  • Both constructions are available in integral or inline arrangements
  • High quality, H grade borosilicate glass tube in 16/19/25mm outer dia is used
  • Available in single length having c/c distance = 1600 mm
  • Gland packing design provides tension free tube installation to achieve zero leakage
  • Transparent Acrylic Plate mounted on C-Frame/Acrylic Pipe or slotted metallic pipe clamped on Tie Rod as glass protector can be provided if required, for additional safety to glass & personnel
  • Adjustable proximity/reed switch arrangement for level sensing with alarm relays



Specifications

Construction Tie rod on for PP and C-frame guards for MS/SS Level Gauges.
Gauge 16 mm/ 19 mm OD (normal liquids) & 25 mm OD (Viscous liquids) heavy walled borosilicate glass in single length of 1500 mm.
Packing Neoprene, Silicon, Viton or PTFE to suit required temp./corrosive conditions.
Material MS, CS, SS304, SS316 & PP as standard.
Isolating Valves Straight/Offset needle valve for integral type and diaphragm/Ball/needle valve for inline type.
C/C Distance 1600 mm in single tube length. Extended range by coupling 2 or more tubes through a coupler.
Vessel Connection Flanged, screwed or industrial fittings in vertical or Horizontal orientation.
Vent / Drain ½" NPT Drain and ¾" Vent plug or valve as required.
Visibility approx 150 mm less than the CC distance
Max. Pressure 0 - 12 kg/cm2
Max. Temperature 0 - 200oC depending upon gland packing/gasket material
Scale Alluminium/Stainless steel with LC 5 mm as standard LC of 1mm on request.
Glass Protector Slotted Al or MS pipe/Acrylic tube for tie rod construction and acrylic shields for C-frame construction, if required.